top of page

MediaFx Group

Public·12 members

How to Flash Your Dreambox with DreamUP V.

How to Flash Your Dreambox with DreamUP V.

If you want to update the firmware of your Dreambox, a popular satellite receiver and digital television device, you can use DreamUP V., the official loader from Dream Multimedia[^1^] [^2^]. This tool allows you to load images into the flash memory of your Dreambox via serial connection. It is very easy to use and takes about 15 minutes to complete the flashing process[^1^]. In this article, we will show you how to flash your Dreambox with DreamUP V. step by step.

DreamUP V. Download Pc

Step 1: Download and Install DreamUP V.

The first thing you need to do is to download DreamUP V. from one of the following links:

  • Universal DreamUp 1.3 Download (Free) - DreamUP.exe

  • Dreambox 4U Downloads

  • DreamUP V. Free Download

After downloading the file, unzip it and run the setup.exe file to install DreamUP on your PC.

Step 2: Connect Your Dreambox to Your PC

The next thing you need to do is to connect your Dreambox to your PC using a null modem cable (also known as a serial cable). Plug one end of the cable into the serial port of your PC and the other end into the serial port of your Dreambox (usually located at the back of the device). Make sure both devices are turned off before connecting them.

Step 3: Run DreamUP and Select Your Dreambox Model

Now you can turn on your PC and run DreamUP from the Start menu or the desktop shortcut. You will see a window like this:

Click on the Port button and select the COM port that corresponds to your serial connection (usually COM1 or COM2). Then click on the Connect button and wait for DreamUP to detect your Dreambox model.

Step 4: Choose an Image File and Start Flashing

Once DreamUP recognizes your Dreambox model, you can choose an image file that you want to flash into your device. You can download image files from various sources online, such as Dream Multimedia TV - Download or Dreambox Update. Make sure you choose an image file that is compatible with your Dreambox model and version.

To select an image file, click on the Flash button and browse to the location where you saved the file on your PC. Then click on Open and wait for DreamUP to load the file into its memory.

After loading the file, click on Flash again and confirm that you want to start flashing by clicking on Yes.

Step 5: Wait for Flashing to Complete and Restart Your Dreambox

Now you just need to wait for DreamUP to flash the image file into your Dreambox's flash memory. This may take several minutes, depending on the size of the file and the speed of your connection.

During the flashing process, you will see a progress bar and some messages on the screen, such as "Calculating CRC32 on STB", "Erasing flash" and "Flashing from memory". Do not interrupt or disconnect anything until the process is finished.

When the flashing is done, you will see a message saying e0e6b7cb5c


Welcome to the group! You can connect with other members, ge...
bottom of page